Filafob is an oilproofing agent able to effectively protect absorbent surfaces, especially against oil-based dirt, without changing their original colour and appearance. These features make it particuarly useful as a stainproofing agent on natural stone agglomerates and cement. The best results are obtained in this application by first applying a coat of Hydrorep waterproofing agent for natural stone. Filafob can also be used indoors as a protective basecoat to be followed by a suitable finish. For natural stone or agglomerate floors, the finish can be produced with a wax chosen from the vast range of Fila products (Marmocera, Filamatt, Veneziana, Stonewax, Filajet, Filalonglife), using the most suitable in each case. Filafob can also be used as oilproofing basecoat for treating sanded rustic terracotta floors; in this case, Filajet should be used as finishing coat.

 
CONTAINERS

5 litre cans in
cartons of 4.
I litre cans in
cartons of I 2.

 

LABELLING
Symbols: St Andrew’s Cross (N). Risk warnings:
flammable product. Irritant for the respiratory tract. Harmful; may cause lung damage if swallowed.
Safety warnings: do not inhale vapours. Avoid contact with the skin. If swallowed, do not stimulate vomiting:
consult a doctor immediately, showing him the container or label.
Contains: heavy hydrogenated naphtha. 

 

HOW IT'S USED 
Dilution: do not dilute. Ready for use.
Application: for treatment of
natural stone outdoor pavings: apply
the first coat of Hydrorep to the dry 24 hours paving, and the next day brush on an
even, continuous coat of Filafob.
As a basecoat: brush on a coat of Filafob and the next day complete the treatment by applying one or two coats of the protective product deemed most suitable for the finish.

COMPOSITION
Blend of synthetic resins dispersed in aromatic hydrocarbon solvent.

TECHNICAL CHARACTERISTICS
Appearance: transparent liquid
Coloun slightly yellow Odoun distinctive odour of aromatic solvent.
Density: 0.87 kg/litre
Flash point: 40c.

COVERAGE 
From 5 to 10 litres for 100m2 for each coat, depending on the absorbency of the material.

PRECAUTIONS
If used indoors, the premisees should be ventilated thoroughly.